What We Inspect

Even new Buildings can and should be inspected. In busy marketplaces, Homes and Buildings are being built quickly, but not always to proper Building and Fire Code Standards.

Included in our inspections are examinations of the following.

• Heating & Ventilation

We operate both systems (heating & cooling), visually check the flue, thermostat, ducts, filters and blowers, electric, gas, oil, heat pump, sump pumps, and hot water systems.

•  Plumbing

We operate fixtures, check heaters, exposed pipes & drains, sump pumps, water pressure and plumbing systems, and check for natural gas and carbon monoxide leaks with a detector.

• Electrical

We open panels, check wiring, lights, receptacles, switches and ground connections. We identify Safety Hazards and Code Violations.

• Roof

We check visible roof surfaces, flashing, gutters, downspouts, storm drains, skylights, valleys, vents, attics, and the framing components. We also walk on the roof after we inspect the attic.

• Structural Components

This includes the visible portions of foundations, framing, walls, floors, ceilings, porches, decks and roofs.

• Exterior Finishes & Accessories

This includes brick, stone, stucco, sidings, fascias, railings, stairs, trim, soffits, windows, doors, caulking, porches, decks, patios, steps, pavement, retaining walls, garages, and other accessories.

• Interior Finishes

We visually check walls, floors, ceilings, windows and doors for water staining with our lighting system.

• Elevation & Drainage

This is very important as it can affect water leakage, settlement, foundation problems & erosion.

• Basements

We check accessible areas for signs of leakage and moisture. We also check the building's structural components.

• Fireplaces & Chimneys

We visually check chimneys, fireplaces & woodstoves, inserts and venting systems.

• Insulation

We visually check accessible areas, such as Attics and Crawl Spaces.

• Fire Safety

All Buildings should have regular periodic Fire Safety Inspections. We notify you when we see a hazard during our visit.

• Garages

We check doors, electrical system, openers & windows, floors and structural components.

• Attics

We check the framing, ventilation, insulation and roof sheathing for signs of moisture penetration.